Flow Rates for Polybutene-1 Pipe

Flow Rates at Specific Velocities for Polybutene-1 Pipe

Velocity 10PB
Flow Rate
16PB
Flow Rate
22PB
Flow Rate
28PB
Flow Rate
1.6 m/s 3.7 L/min 11.8 L/min 23.4 L/min 37.9 L/min
2.4 m/s 5.5 L/min 17.7 L/min 34.9 L/min 56.8 L/min
3.0 m/s 6.8 L/min 22.1 L/min 43.8 L/min 71.0 L/min


Flow Rate Comparisons: Polybutene-1 vs PE-X & PP-R

These below graphs show the relative flow rates for 1 metre of straight Polybutene-1 pipe compared to the PE-X and PP-R equivalents (for both Type 16 and Type 22 pipe, and also with a straight connector attached in 2 of the scenarios).

You will note that Polybutene-1 performs much better than both PE-X and PP-R:

Flow Rate Comparison of Type 16 Pipe

 

Flow Rate Comparison of Type 16 Pipe + Straight Connector

 

Flow Rate Comparison of Type 22 Pipe

 

Flow Rate Comparison of Type 22 Pipe + Straight Connector

 

From the graphs it can be clearly seen that in both the 1/2" Noml and 3/4" Noml sizes, Buteline PB-1 pipe out-performs the other plastic pipes in terms of permissible flow through the pipe.

In general terms, the graphs clearly demonstrate that a 3/4" Noml PB-1 pipe will deliver around 30% more water than the equivalent PE-X pipe at a similar pressure.

The superior flow rate of Buteline PB-1 pipe gives many advantages to the end user.

Energy costs are reduced as less energy is required to move the water around the system, and the excellent flow characteristics of Buteline PB-1 pipe mean less turbulence within the pipework, in turn leading to a quieter plumbing system.

This website uses cookies to optimise your experience.
By continuing to use our website you are agreeing to our Privacy Policy and Cookie Policy.
Accept and close this alert or Read Privacy Policy