Flow Rates For Polybutene-1 Pipe

Flow Rates at Specific Velocities for Polybutene-1 Pipe

18 PB
Velocity Flow Rate
1.6 m/s 11.8 L/min
2.4 m/s 17.7 L/min
3.0 m/s 22.1 L/min
22 PB
Velocity Flow Rate
1.6 m/s 23.4 L/min
2.4 m/s 34.9 L/min
3.0 m/s 43.8 L/min
28 PB
Velocity Flow Rate
1.6 m/s 37.9 L/min
2.4 m/s 56.8 L/min
3.0 m/s 71.0 L/min

Flow Rate Comparisons: Polybutene-1 vs PE-X & PP-R

These below graphs show the relative flow rates for 1 metre of straight Polybutene-1 pipe compared to the PE-X and PP-R equivalents (for both Type 18 and Type 22 pipe, and also with a straight connector attached in 2 of the scenarios).

 

Flow Rate Comparison of Type 18 Pipe

 

Flow Rate Comparison of Type 18 Pipe + Straight Connector

 

Flow Rate Comparison of Type 22 Pipe

 

Flow Rate Comparison of Type 22 Pipe + Straight Connector

 

From the graphs it can be clearly seen that in both the 1/2" Noml and 3/4" Noml sizes, Buteline PB-1 pipe out-performs the other plastic pipes in terms of permissible flow through the pipe.

In general terms, the graphs clearly demonstrate that a 3/4" Noml PB-1 pipe will deliver around 30% more water than the equivalent PE-X pipe at a similar pressure.

The superior flow rate of Buteline PB-1 pipe gives many advantages to the end user.

Energy costs are reduced as less energy is required to move the water around the system, and the excellent flow characteristics of Buteline PB-1 pipe mean less turbulence within the pipework, in turn leading to a quieter plumbing system.

This website uses cookies to optimise your experience.
By continuing to use our website you are agreeing to our Privacy Policy and Cookie Policy.
Accept and close this alert or Read Privacy Policy