The Buteline Plumbing System is designed to be used with complete confidence. You will get a simple, controlled accurate joint every time. Below is a quick installation guide:

Step 1  Cut Copper Pipe

Cut copper pipe to length, ensuring the end is square and free from burrs.

 

 

 

 

 

 

Step 2  Slide on Buteline Compression Fitting

Slide the compression fitting onto the copper pipe, ensuring that the nut and olive are in place.

 

 

 

 

 

 

 

Step 3  Tighten

Tighten the compression fitting.

 

 

 

 

 

 

 

Step 4  Insert Buteline Pipe and Clamp

Insert the PB pipe fully up to the shoulder of the fitting and clamp using the Buteline clamp tool.

Position the Buteline clamp tool squarely, approximately 2mm in from the end of the clamp ring.

Closes handles to stops, hold in the tightly closed position for a moment to ensure that the flow of material is performed.

Open and remove the tool.

 

Step 5  All complete!

Installing the Buteline Plumbing System is quick and sure and always provides a visual indicator of joint completion.

As you can see, the process of using the Buteline system is quick, simple and highly efficient.