The Buteline Group Plumbing System -

Select your country:

STEP 1: CUT

▪ Slightly twist pipe as you begin to cut.

▪ Use the Buteline PB pipe cutter to ensure a square clean cut.

STEP 2: INSERT PIPE

▪ Once you have cut the pipe, simply insert into the Buteline fitting required to do the job.

▪ Note: Make sure you fully insert pipe.

STEP 3: CLAMP

▪ Clamp the Buteline fitting, using ONLY the Buteline clamping tool.

▪ Position the Buteline clamp tool squarely, approximately 2mm in from the end of the clamp ring.

▪ Close handles to stops, hold in the tightly closed position for a moment, this ensures that the flow of material is performed.

▪ Open and remove tool.

STEP 4: COMPLETION

▪ As you can see in the image, the process of using the Buteline System is quick, simple and highly efficient.

Introducing Buteline UK Ltd.

The Buteline Plumbing System was invented and established in New Zealand in 1980 where it remains the market leader. Since then, Buteline has established itself in Australia and Malaysia where it too has a prominent position today.
The Buteline Plumbing System has been designed by our own engineers, and is supported by our R&D team who are constantly developing leading innovative products for you.
The Buteline Plumbing System is approved by the UK Water Regulations Advisory Scheme WRAS (0510076) and also meets the exacting British Standard BS 7291:2002.
The precision engineered, hardened clamp tool is proven to provide a leak free joint for the Buteline Plumbing System for over 25 years. We are so confident in the Systems performance that we offer a 25 year guarantee.

For more information on where your nearest stockist is or for a complete demonstration by one of our team, please call us today, if you wish to order online, please click on the Bute Store Pop up Displayed.

Click here to download the UK Intro PDF.

Polybutene-1 (PB-1), the material from which Buteline pipe is made, is not a hybrid material and was specifically developed for use with hot and cold potable water.

Testimonial: PAN Plumbing

PAN Plumbing, based in London, is using Buteline’s Polybutene plumbing system to help speed up the installation process and deliver a leak-free guarantee to all of its installations. Mark Page, Director of PAN Plumbing, has been using the Buteline system on plumbing projects for some time and agrees that it can help to dramatically speed up the installation process. He said,

"We started using the Buteline system some time ago and have not looked back since. The system itself is easy to install and offers significant time saving benefits particularly when compared to traditional copper or even plastic push fit systems. The pipe is not only easy to cut but due to its flexible nature, it can be bent to fit in to the most awkward of places without the need to cut and weld individual pieces of pipe, as is the case with copper. By eliminating the need for a naked flame, the Buteline system is far safer to install than a copper system. Thanks to its three part cold mechanical weld jointing system using the easy to operate clamp tool, a join can be made that is so secure it will never come apart, rivalling that of a plastic push fit fixing, which can deteriorate over time."

Click here to read more of this article.

New Mini Tool now Available!:

Small, lightweight and very portable
Easily operable with just one hand
Front opening jaw for easy access
Ratchet click-to-release mechanism
Easy to use in tight situations

Contact Buteline today for more info, or to get your hands on one of these great new products! Free Phone: 0800 043 8883

(Updated 11 Jun 07)

(Updated 3 March 2010)

(Updated 23 July 2010)

Roger Bisby tests Buteline's fittings to the limit.

What crimps have going for them is a really neat leak free joint which is completed in seconds. I took a whole selection of Buteline fittings together with some coils of pipe and some straight lengths to see what I could achieve...(click on picture to read more...)

	Home \| Buteline Plumbing System \| Technical \| Projects \| About Buteline \| Contact