Select your country:

STEP 1: CUT

▪ Slightly twist pipe as you begin to cut.

▪ Use the Buteline PB pipe cutter to ensure a square clean cut.

STEP 2: INSERT PIPE

▪ Once you have cut the pipe, simply insert into the Buteline fitting required to do the job.

▪ Note: Make sure you fully insert to flush.

STEP 3: CLAMP

▪ Clamp the Buteline fitting, using ONLY the Buteline clamping tool.

▪ Position the Buteline clamp tool squarely, approximately 2mm in from the end of the clamp ring.

▪ Close handles to stops, hold in the tightly closed position for a moment, this ensures that the flow of material is performed.

▪ Open and remove tool.

STEP 4: COMPLETION

▪ As you can see in the image, the process of using the Buteline System is quick, simple and highly efficient.

MASTER SPECIFICATION DOCUMENTS

7123B BUTELINE HOT AND COLD WATER SYSTEM

Click here to view

MasterSpec is the leading specifi cation system in New Zealand’s construction industry. Providing detailed specifi cation templates that can be easily modifi ed to suit any project, MasterSpec delivers the most effi cient and reliable solution available to design professionals.

It is the benchmark for Architectural Specifi cations in the New Zealand Building Industry, with nearly 700 Architectural Practices, representing approximately 2000 individual Architects and Designers who subscribe to MasterSpec’s Specifi cation service. Buteline has joined MasterSpec and has had two Specifi cations written under their system: Basic for usual residential situations and Standard for more complicated Residential and Commercial applications to be included in the Designers Building Consent documents to be lodged to TAs (Councils) for approval.

These Specifi cations are essential for Architects, Builders, Designers and Home Owners to ensure full compliance with New Zealand’s Building Act 2004. The Buteline Plumbing System has the “Accreditation Certifi cate” to prove compliance for potable hot and cold water reticulation in buildings in New Zealand.

For further information see:

• Appendix 1 for Buteline/MasterSpec documents
• The MasterSpec website: www.masterspec.co.nz

The validity of specifi cation documents is correct as at the date this manual was printed.

	Home \| Buteline Plumbing System \| Projects \| Bute News \| About Buteline \| Contact