 |
STEP 1: CUT
▪ Slightly twist pipe as you begin to cut.
▪ Use the Buteline PB pipe cutter to ensure a square clean cut.
STEP 2: INSERT PIPE
▪ Once you have cut the pipe, simply insert into the Buteline fitting required to do the job.
▪ Note: Make sure you fully insert to flush.
STEP 3: CLAMP
▪ Clamp the Buteline fitting, using ONLY the Buteline clamping tool.
▪ Position the Buteline clamp tool squarely, approximately 2mm in from the end of the clamp ring.
▪ Close handles to stops, hold in the tightly closed position for a moment, this ensures that the flow of material is performed.
▪ Open and remove tool.
STEP 4: COMPLETION
▪ As you can see in the image, the process of using the Buteline System is
quick, simple and highly efficient.
|
|
