Select your country:




	Kampung Sungai Sirih Klang This is a mixed development located next to the railway track servicing between Kuala Lumpur and Port Klang. It consists of 144 units of low cost and 130 units of medium cost houses...more details

BUTELINE PB INSTALLATION DEMONSTRATION

The Buteline Plumbing System is designed to be used with complete confidence. You will get a simple, controlled accurate joint every time.

Cut
Slightly twist pipe, as you begin to cut.
Use the Buteline PB pipe cutter to ensure a square clean cut...

Insert Pipe
Once you have cut the pipe, simply insert
into the Buteline fitting required to do the job.
Note: Make sure you fully insert pipe.

Clamp
Clamp the Buteline fitting, using ONLY the Buteline clamping tool.

Position the Buteline clamp tool squarely,
approximately 2mm in from the end of the clamp ring.
Close handles to stops, hold in the tightly closed position for a
moment, this ensures that the flow of material is performed.
Open and remove tool.

Completion
As you can see in the image, the process of using the Buteline System is
Quick, Simple and Highly Efficient.