|
Buteline manufactures pipes in various sizes up to and including 32mm from two materials. Polybutene-1 (PB), which was developed over 40 years ago for use as hot and cold domestic plumbing pipe, is a proven solution for the conveyance of clean healthy drinking water. In addition, Buteline has adopted Polyethylene as a cost effective alternative plumbing material for cold water only installations. Polyethylene is accepted worldwide as one of the preferred materials for the transport of potable water, and has been in service for over 60 years.
The pipe is manufactured with Buteline equipment, designed and engineered by Buteline's equipment division. It has the capability to run 5 metre lengths of pipes and to automatically cut Quality Assurance samples, ensuring pipe quality is monitored and maintained throughout the manufacturing process.
Buteline's manufacturing equipment and technology ensures the
manufacture of consistently high quality pipe. Combined with Buteline's laboratory testing, this ensures that all pipe exceeds
even the most stringent world standards.
Buteline Pluming System has won world acclaim for their advanced engineered design and capabilities.
BUTE-PB (Polybutene-1 (PB))
Application: Potable HOT & COLD Water
Standard Compliant
Pipes - Australian/New Zealand standard AS/NZS 2642.2:1994
Fittings - Australian/New Zealand standard AS/NZS 2642.3:1994
|
Size |
O/D |
WT |
ID |
Length |
| 18mm (1/2") |
15.95mm |
1.64mm |
12.67mm |
5.0m |
| 22mm (3/4") |
22.25mm |
2.14mm |
17.97mm |
5.0m |
| 28mm (1") |
28.08mm |
2.80mm |
22.48mm |
5.0m |
Working Pressure
1600 Kpa (230 Psi) at 20°C
740 Kpa (107 Psi) at 80°C
Hydrostatic Design Stress
7.6 Mpa (1100 Psi) at 20°C
3.5 Mpa (507 Psi) at 80°C
Polybutene-1 (PB) (PB)
Density = 0.93 kg/l @ 25°C
Melting Point = 124 - 126°C
Thermal Conductivity = 0.18W/M per °C
Expansion Rate = 0.13 mm/°C
BUTE-PE (Polyethylene)
 |
HE25 BUTE
PN 12.5
5m x 25mm x 2.3mm
|
HE20 BUTE
PN 16
5m x 20mm x 2.3mm
|
HE32 BUTE
PN 10
5m x 32mm x 3.1mm |
Application: Potable COLD Water
Standard Compliant
Pipes - Malaysian standard MS 1058 : 2002
Fittings - Australian standard AS 4129 : 2000
|
Sizes |
O/D |
WT |
ID |
Length |
| 20mm (1/2") |
20.15mm |
2.4mm |
15.35mm |
5.0m |
| 25mm (3/4") |
25.15mm |
2.4mm |
20.35mm |
5.0m |
| 32mm (1") |
32.15mm |
2.9mm |
26.35mm |
5.0m |
Working Pressure at 20°C
20mm (1/2") PN16 230 Psi/1600 Kpa
25mm (3/4") PN12.5 180 Psi/1250 Kpa
32mm (1") PN12.5 180 Psi/250 Kpa
Hydrostatic Design Stress
6.3 Mpa (920 Psi) at 20°C
Polyethylene (HDPE)
Density = 0.955 kg/l @ 25°C
Vicat Softening = 116°C
Thermal Conductivity = 0.4 W/M per °C
Expansion Rate
= 0.26mm/°C
Return to Previous Page |
